2m2 300w DCM-PRO HEATING WIRE

Click to enlarge



2m2 300w DCM-PRO HEATING WIRE

WARMUP

UNDERFLOOR HEATING

(Product Code: DCM-C-2)

£89.52
( each exc VAT )
Including VAT

QTY Price(exc VAT)
1 - 2 £ 89.52
3 - 999999 £ 82.65
Warmup DCM-PRO Cable 2m² DCM-C-2

The DCM-PRO heating 2m² cable is inserted in between the castellation of the DCM-PRO Mat or Roll to accomplish a heating cable system suitable for most floor finishes. This is one of the fastest solutions for the installation of a heated decoupling system in all areas, installing electric underfloor heating in minutes with less tile adhesive.

WarmUp DCM-PRO System's innovative underfloor heating decoupling system can be installed in minutes with the added advantage of requiring less tile adhesive. The DCM-Pro's castellation's are designed to protect the heating wire allowing for easy safe and rapid tiling straight on top of the membrane. The open layout of the castellation's allow for easy pouring and even spread of self-levelling compound, without the worry of any holes or air gaps. The system suits all floor types and protects the floor finish from seasonal changes that may cause cracks. If you require technical advice or are undertaking a large project, please call 0208 838 8181 where experienced specialists are available to assist you Monday - Friday from 9.00 to 17.00 Key Features:

  • Installs in minutes with less adhesive
  • Can be used with all floor types including tiles, engineered wood, vinyl and carpet providing a constant output of 150W/m2
  • Easily clips into the DCM-PRO Mat (sold separately) by gently pressing it in between the castellation's
  • The cable can be spaced at 60mm, 90mm & 120mm depending on power requirements.
  • No tools required to fit the cable
  • THE DCM PRO MAT AND CABLE ARE SOLD SEPARATELY. YOU WILL REQUIRE BOTH FOR YOUR INSTALLATION

Technical Data:

  • Operating voltage: 220 - 240V: 50Hz
  • Thickness: 4.5mm (± 0.2mm)
  • Inner/ outer wire insulation: advanced fluoropolymer (ECTFE)
  • Output Rating: 150w/m2 (3 Castellation's - 90mm)
  • Inner Insulation: Advanced Fluoropolymer (ETFE)
  • IP Rating: IPX7
  • Min. Insulation Temp: 5°C)
  • 3m long Cold tail Connection
  • Approvals: BEAB
  • European compliant and CE marked
  • To be used in conjunction with DCM-PRO Mat
  • Please click on the documents for full Installation and Technical information

Please note:

  • All electrical connections must be performed by a certified electrician
  • The manufacturer includes a Safety Net Installation Guarantee and the product has a Lifetime Limited Warranty
  • Check with the flooring manufacturer to ensure the floor is suitable for use with electric underfloor heating




WRITE YOUR REVIEW

Only registered users can write reviews. Please, log in or register

DELIVERY OPTIONS

 

Collections from our trade counter are free.

Standard Delivery

Our standard deliverys are between the hours of 8am and 6pm Monday to Friday excluding national Holiday's.

Please also note certain Items may require additional delivery charges, such as Conduit, and Fluorescent tubes.

we use secure couriers and offer a free delivery on orders over and above £50.00 excluding VAT (£60.00 inclusive). For orders below this amount we charge £6.50 + vat (£7.80 incl). Certain products are excluded from national delivery due to weight and fragility, these are identified on each item.

Delivery is normally 2-3 days, unless a special item has been ordered. In this case we will keep you advised on the lead time. 

When entering your address details, our system will prompt for delivery address postcode, please key in as example (e.g. SM3 9AG). Any delivery charge will be automatically calculated. Our system should advise you when finishing your delivery options. However please call if you believe this has not gone through correctly.

SPECIAL DELIVERY

We can offer next day delivery and timed deliveries where required, these are on a price on application basis so please call us prior to placing your order so that we can advise costs.

 

Any questions about the above, please email us on sales@powerpointelectrics.co.uk or call on 0208 330 3345